The TaylorMade R1 came out in 2013 [1]. Its headline idea was a 12-position loft sleeve plus an adjustable sole plate for face angle. That was 13 years ago, so the questions now are different: is it still worth buying used, and how far behind is it compared with the TaylorMade Qi4D?
The R1 in 2013: what it was
The R1 was built around a 12-position loft sleeve plus an adjustable sole plate for face angle. Its selling point was adjustability, so one head could be set up for different players. The 460cc head is the same size limit drivers are built to today.
Then vs now: R1 vs TaylorMade Qi4D
| Spec | TaylorMade R1 | TaylorMade Qi4D |
|---|---|---|
| Release year | 2013 [1] | 2026 [2] |
| Head size | 460cc | — |
| Adjustable hosel | Yes | Yes |
| Weighting | Movable/adjustable | 4 weights (2×9g, 2×4g) |
| Lofts | Adjustable via sleeve | — |
| Launch price (new) | — | $649.99 ($699.99 Launch Monitor Enabled) |
| Price | Check Price | Check Price |
We list only specs we could tie to a source. A dash means we could not confirm the figure. We do not have our own launch-monitor numbers for either club.
What TaylorMade changed after the R1
The models below are the TaylorMade drivers we cover that came after the R1. Each one is a step you skip by buying the old club.
| Year | Model | Main change | Prices |
|---|---|---|---|
| 2017 | TaylorMade M2 | A forgiving carbon-crown head with a fixed rear weight | Check Price |
| 2018 | TaylorMade M4 | Twist Face, a face with corrective curvature in the high-toe and low-heel areas | Check Price |
| 2019 | TaylorMade M5 | Speed Injection (each face tuned to the speed limit) plus Twist Face and a weight track | Check Price |
| 2019 | TaylorMade M6 | Speed Injection and Twist Face in a forgiving head | Check Price |
| 2020 | TaylorMade SIM Max | An aerodynamic sole shape and a rear Inertia Generator weight | Check Price |
| 2021 | TaylorMade 300 Mini Driver | A mini driver that revived the 300 Series name | Check Price |
| 2022 | TaylorMade Stealth | A 60-layer carbon face instead of titanium | Check Price |
| 2026 | TaylorMade Qi4D | Current model | Check Price |
Showing the 8 most recent steps.
Is the R1 worth buying in 2026? A budget buy, if it fits you
The adjustable hosel means a fitter can still tune loft and swap shafts. It gives up some ball speed and forgiveness compared with current heads, but at a used price it can make sense for a mid- or high-handicap player on a budget.
Who should still buy one?
- Buy it if you want a forgiving club on a small budget and can try it before you pay.
- Skip it if you can stretch to a recent used model (the last three or four years) — the forgiveness gap is bigger than the price gap.
Buying a used R1: checklist
- Sleeve and wrench: make sure the adapter comes with it and that it fits the TaylorMade system you have. Ask the seller which setting it is in.
- Face: look for cracks, dents or a caved-in look at the centre. A cracked face can't be repaired.
- Crown: sky marks and paint chips are cosmetic; dents are not.
- Shaft and grip: check the flex label. A worn grip costs little to replace; a shaft that is too stiff costs you carry.
- Price check: we could not verify current used prices, so compare recent sold listings before you buy (eBay sold listings).
Check current listings on Amazon
FAQ
When did the TaylorMade R1 come out?
2013.
Is the TaylorMade R1 still a good driver?
A budget buy, if it fits you. The adjustable hosel means a fitter can still tune loft and swap shafts. It gives up some ball speed and forgiveness compared with current heads, but at a used price it can make sense for a mid- or high-handicap player on a budget.
Is the R1 adjustable?
Yes, it has an adjustable hosel.
What replaced the R1?
TaylorMade's current equivalent is the TaylorMade Qi4D (2026). Launch price: $649.99 ($699.99 Launch Monitor Enabled).